Description
Solenoid SI Series
Features:
- Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
- Automatically combines battery banks during the charging cycle and isolates under discharge
- 12/24 Volt auto ranging voltage input
- Waterproof rated IP67 – temporary immersion for 30 minutes
- Ignition protected – safe for installation aboard gasoline powered boats
- Remote LED output indicates relay state away from ACR
- Supports high-output alternators up to 120 Amperes
- Automatically combines battery banks during the charging cycle and isolates under discharge
- Ignition protected – safe for installation aboard gasoline-powered boats
- Activates from any charging source – alternators, battery chargers, or solar panels
Specifications:
- Continuous rating: 120A DC
- Intermittent rating: 210A DC
- Closed current draw:
- 175mA @ 12 Volts
115 mA @ 24 Volts - Open current draw: 15mA
- Opening delay: 0.34 seconds
- Relay contact position – Combine (30seconds):
- 13.6V DC @ 12 V
27.2V DC @ 24V - Relay contact position – Combine (2 minutes):
- 13.0V DC @ 12V
26.0V DC @ 24V - Relay contact position – Open Low (30 seconds):
- 12.75V DC @ 12V
25.5V DC @ 24V - Relay contact position – Open Low (10 seconds):
- 12.35V DC @ 12V
24.7V DC @ 24V - Relay contact position – Open High:
- 16.0V DC @ 12V
30.0V DC @ 24V - Terminal stud size: 3/8″-16 (accepts M10 ring terminal)
- Maximum cable size: 1/0 AWG
- Maximum torque: 140lb
- Agency standards ISO 8846
- Meets SAE J1171 external ignition protection requirements – rated IP67
- Weight: 0.57kg (1.26lb)
- Width: 98.71mm (3.886″)
- Height: 88.96mm (3.502″)
