International Trilux Prop-O-Drev 500ml

Description

Trilux Prop-O-Drev

Trilux Prop-O-Drev is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear.

• Aerosol spray is ideal for painting awkward shapes and difficult to reach areas.
• Quick and easy application saves you time and effort.
• Suitable for use on aluminium and stainless steel

Prime bare metal and factory enamelled surfaces with 2 coats of VC Prop-O-Drev Primer. This is essential on aluminium and alloy as Trilux Prop-O-Drev . is NOT suitable for direct application. For best results on previously antifouled surfaces, remove existing paintwork. Alternatively, abrade with wet 240 grade paper.

Method: Spray sparingly 10-15 cm (4-10″) from the surface. Apply a minimum of 3 coats, allowing 30 mins between coats.

Hints: Mixing Shake can vigorously. Once mixing ball is heard, shake for minimum 2 minutes prior to use. After spraying, invert can and spray for 2 seconds to clean the nozzle.

Features:

• Thinner VC General Thinner.
• Cleaner VC General Thinner
• Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness.
• Some Important Points To prevent premature failure: ensure the correct amount of paint is applied using the coverage as a guide. Product temperature should be minimum 0°C and maximum 35°C. Ambient temperature should be minimum 0°C/32°F and maximum 35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C.
• Compatibility/Substrates: Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed metals. Also suitable for factory enamelled finishes.
• Number of Coats: 3 minimum